Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Auxiliary Water Pump: Service and Repair
Removal
REMOVAL
WARNING: Review safety precautions and warnings before performing this procedure. Failure to follow the warnings and cautions may
result in serious or fatal injury.
1. Disconnect and isolate the negative battery cable.
2. Partially drain the engine cooling system.
3. Remove the air cleaner housing from the engine compartment.
4. Disconnect the wire harness connector (1) from the electric coolant pump (2).
5. Loosen the hose clamps (4) from the electric coolant pump.
6. Using a twisting motion gently remove both heater hoses (3 and 6) from the electric coolant pump.
7. Remove the electric coolant pump from the bracket (5).
