Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
shaft as this may damage the clutch plate.
NOTE: Use care not to lose any clutch shim(s) during removal of the clutch plate, as they may be reused during the clutch plate installation
process.
8. Tap the clutch plate (2) lightly with a plastic mallet to release it from the splines on the compressor shaft (1) and remove the clutch plate and
shim(s) (3).
9. Using Snap Ring Pliers 9764 or equivalent (1), remove the snap ring (2) that secures the pulley and bearing assembly (3) to the front of the A/C
compressor and remove the pulley and bearing assembly.
10. Using Snap Ring Pliers 9764 or equivalent (1), remove the snap ring (4) that secures the compressor clutch field coil (2) to the front of the A/C
compressor (3) and remove the field coil.
Installation
INSTALLATION
NOTE: Typical A/C compressor and clutch assembly shown in illustrations.