Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
recover, evacuate, and charge the front A/C refrigerant system. When the low or high pressure valves on the manifold gauge set are opened, the
refrigerant in the system will escape through this hose.
HIGH PRESSURE GAUGE HOSE The high pressure hose (Red with Black stripe) (4) attaches to the high side service port located on the A/C liquid
line, near the front A/C expansion valve in the engine compartment. An A/C pressure transducer is used on this model and a scan tool may be used to
monitor high-side pressures.
LOW PRESSURE GAUGE HOSE The low pressure hose (Blue with Black stripe) (5) attaches to the low side service port located on the A/C suction
line, also near the front A/C expansion valve.
REFRIGERANT PORT CONNECTIONS-REAR A/C SYSTEM
CAUTION: Do not use an R-12 manifold gauge set on an R-134a system. The refrigerants are not compatible and system damage will result.
RECOVERY/RECYCLING/EVACUATION/CHARGING HOSE The center manifold hose (Yellow, or White, with Black stripe) (3) is used to
recover, evacuate, and charge the rear A/C refrigerant system. When the low or high pressure valves on the manifold gauge set are opened, the
refrigerant in the system will escape through this hose.
HIGH PRESSURE GAUGE HOSE The high pressure hose (Red with Black stripe) (4) attaches to the high side service port located on the rear A/C
discharge line, near the right front frame rail in the engine compartment.
LOW PRESSURE GAUGE HOSE The low pressure hose (Blue with Black stripe) (5) attaches to the low side service port located on the rear A/C
suction line, also near the right front frame rail.
