Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Parking Brake Warning Switch: Description and Operation
Description
DESCRIPTION
The park brake switch (1) is located on the park brake lever mechanism (2) on the floor panel near the inboard rear corner of the driver side front seat
riser (4). This switch includes a spade-type output terminal that connects the switch to the vehicle electrical system through a dedicated take out and
connector (5) of the vehicle wire harness. The output terminal is integral to the stationary contact within a molded plastic insulator.
A locating tab on the insulator engages a slot in the park brake lever mechanism for positive switch location. External to the insulator is a movable leaf
contact with an integral grounding lug on one end and an integral actuating lever and follower on the opposite end. The switch is secured to and
grounded by a single screw (3) to the park brake lever mechanism.
The park brake switch cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.
