Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Fog/Driving Lamp Bulb: Service and Repair
Removal
BULB
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Disconnect and isolate the battery negative cable.
2. Reach up behind the front bumper ahead of the front fender wheel house splash shield to access the bulb on the back of the front fog lamp housing.
3. Firmly grasp the bulb base (1) on the back of the fog lamp housing (2) and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the bulb straight out from the keyed opening in the housing.
