Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Oil Change Reminder Lamp: Service and Repair
To reset the ASSYST MAINTENANCE COMPUTER, perform the following steps:
Without Steering Wheel Buttons
1.
Turn key to the ON/RUN position.
2.
Within one second press the M button repeatedly until the service symbol and the current remaining distance, the remaining time or service
exceeded is displayed.
3.
Within 10 seconds turn the key to OFF/LOCK while still holding the M button.
4.
Turn the key to ON/RUN again. The present status for days or distance is displayed once more. Continue to hold the M button.
After approximately 10 seconds, a signal sounds and the display shows 16,000 km (10,000 miles) for approximately 10 seconds.
Release the M button.
With Steering Wheel Buttons
1.
Turn key to the ON/RUN position.
2.
Within one second press the service selection button repeatedly until the instrument cluster display shows the Total and trip odometer" basic
display.
3.
Press the scroll forward/back button until the service symbol and the current remaining distance, the remaining time or service exceeded is
displayed.
4.
Press the reset button on the instrument cluster until the display on the instrument cluster shows the message Reset service interval?"
5.
Confirm the message Reset service interval?" with the reset button on the instrument cluster. If the reset button on the instrument cluster is
pressed again, the message "Service interval was reset" is shown.
If the ASSYST counter was inadvertently reset, have an authorized dealer correct it.
The message is displayed for approximately 10 seconds when turning the key to the ON/RUN position, or while driving when reaching the service
warning threshold. It can be canceled manually by pressing the knob/button.
Once the suggested term has passed, the message plus either the symbol for Service A or the symbol for Service B preceded by a - (minus symbol) blinks
for approximately 30 seconds and a signal sounds every time when turning the key to the ON/RUN position.
The ASSYST display can also be called up for approximately 10 seconds with the display illuminated by pressing the knob/button twice within one
second.
Following a completed A or B service your authorized dealer sets the counter to 16,000 km (10,000 miles).
When disconnecting vehicle battery for one or more days at a time, such days will not be counted. Any such days not counted by ASSYST can be added
by your authorized dealer.
The interval between services is determined by the type of vehicle operation. Driving at extreme speeds, and cold starts combined with short distance
driving in which the engine does not reach normal operating temperature, reduce the interval between services.
However you choose to set your reference numbers, the scheduled services must be followed to properly care for your vehicle.
