dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - ECM Update For EGR Operation|Page 3756 > < Recall - ECM Update For EGR Operation|Page 3750
Page 1
background image

Technical Service Bulletin # H44

Date: 090226

Recall - ECM Update For EGR Operation

February 2009

Dealer Service Instructions for:
Emissions Recall H44
Reprogram ECM  EGR System

Models

2007-2009 (VB) Dodge Sprinter

2007-2009 (VB) Freightliner Sprinter

NOTE

This recall applies only to the above vehicles equipped with a 3.0L diesel engine ("5" in the 8th VIN position) and built from September 1, 2006
through October 22, 2008 (MDH 090100 through 102210).

IMPORTANT

Some of the involved vehicles may be in dealer vehicle inventory. Dealers should complete this recall service on these vehicles before retail delivery.
Dealers should also perform this recall on vehicles in for service. Involved vehicles can be determined by using the VIP inquiry process or GRS
DealerCONNECT functions.

Subject

The Engine Control Module (ECM) on about 39,100 of the above vehicles may not actuate the EGR valve sufficiently to prevent soot accumulation,
resulting in improper valve operation or sticking. Improper valve operation may cause excessive exhaust emissions, illumination of the Malfunction
Indicator Lamp and a vehicle limp-in condition.

Repair

The Engine Control Module (ECM) must be reprogrammed (flashed).

Parts Information

Due to the likelihood that the required labels are already in your parts inventory, no labels will be distributed initially. The following label may be
ordered as needed.

Each vehicle requires application of the following label:

Special Tools

These existing special tools may be required to perform this repair:

Recall - ECM Update For EGR Operation|Page 3756 > < Recall - ECM Update For EGR Operation|Page 3750