Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
1. Disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service.
2. Remove the trim paneling from the interior of the right or left front door step well.
3. Disconnect the vehicle wire harness connector (5) from the side impact sensor (2) connector receptacle.
4. Remove the screw (1) that secures the side impact sensor to the bracket (3) welded to the base of the inner right or left B-pillar (4).
5. Remove the side impact sensor from the bracket.
