dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Hood Sensor/Switch (For Alarm)|Description|Page 376 > < Hood Sensor/Switch (For Alarm)|Diagrams
Page 1
background image

Hood Sensor/Switch (For Alarm): Description and Operation
Description

DESCRIPTION

The hood ajar switch (1) is a normally closed, single pole, spring-loaded paddle switch. The switch paddle is actuated by the hood latch mechanism when
the hood is closed. This switch is used only on vehicles equipped with the Vehicle Theft Security System (VTSS) for sale in certain markets where
protection of the underhood area is required equipment.

The molded plastic switch body has an integral molded mount (3) that is secured to the underside of the hood latch beneath the upper radiator support
crossmember cover. The switch is connected to the vehicle electrical system through a pigtail wire (2) and connector.

The hood ajar switch cannot be readjusted or repaired. If the switch is damaged or ineffective, it must be replaced with a new unit.

Hood Sensor/Switch (For Alarm)|Description|Page 376 > < Hood Sensor/Switch (For Alarm)|Diagrams