Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
instrument panel.
3. Align the lower end of the fuse/relay block #1 with the two alignment posts integral to the lower end of the mounting bracket (4) on the dash panel.
4. Push the lower end of the fuse/relay block #1 forward over the alignment posts of the lower mounting bracket until the latch tab (3) on each side
snaps back into place.
5. Reconnect the external wire harness connections to the BCM.
6. Reinstall the trim onto the left cowl side inner panel.
7. Reconnect the battery negative cable.