Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Ball Joint: Service and Repair
Installation
INSTALLATION
1. Install the ball joint (3) into the lower control arm (2) using special tool 9294-3 (Installer ring) (4) inserted in 9294-2 (Receiver) (5) and C-4212-F
(1).
2. Install the steering knuckle.
3. Install the front strut (1) to the knuckle and install the bolts (2) Tighten to 140 Nm (103 ft. lbs.) Plus an additional 120° turn.
4. Install the caliper assembly (4) and install the caliper adapter bolts (1) and tighten to 80 Nm (59 ft. lbs.) Plus an additional 40° turn.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
7. Check the front wheel alignment.