Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Rear Cross-Member: Service and Repair
Installation
INSTALLATION
1. Install the transmission crossmember (5) and install the bolts (3, 4)
2. Tighten the crossmember bolts (3) to 58 Nm (43 ft. lbs.).
3. Remove the transmission support.
4. Install the bolt (4) and tighten to;
-
M8 = 30 Nm (22 ft. lbs.).
-
M10 = 58 Nm (43 ft. lbs.).