Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Stabilizer Link: Service and Repair
Front
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the upper stabilizer link nut (5) at the stabilizer bar (6).
3. Remove the lower stabilizer link nut (3) at the spring stop plate.
4. Remove the stabilizer link (4).
Installation
INSTALLATION
1. Install the stabilizer link (4) to the vehicle.
2. Install the lower stabilizer link nut (3) at the spring stop plate Tighten the bolts to 58 Nm (43 ft. lbs.).
3. Install the upper stabilizer link nut (5) at the stabilizer bar (6) Tighten the bolts to 106 Nm (78 ft. lbs.).
4. Lower the vehicle.
