Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Suspension Strut / Shock Absorber: Service and Repair
Front Strut / Shock
Removal
REMOVAL
1. Remove the floor pan screws (1) and remove the floor mat (2).
2. Remove the upper strut mounting bolts (3).
3. Raise and support the vehicle.
4. Remove the front wheels.
5. Remove the rear half of the wheel well liner.
6. Remove the wheel sensor wire (7) from the routing clip.
7. Remove the lower bolts (2) from the knuckle.
8. Remove the strut (1) from the steering knuckle.
Installation
INSTALLATION