Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
Shift Cable: Service and Repair
Installation
INSTALLATION
1. Install the shift cable into the floor pan and seat the grommet (1).
2. Raise and support the vehicle.
3. Install the shift cable (1) to the transmission.
a. Push shift cable onto the transmission shift lever (2) ball socket.
b. Latch ball socket latch of cable.
c. Clip shift cable retainer into retainer bracket.
4. Install the shift cable heat shield and screws. Tighten the screws to 4 Nm (35 in.lbs.)
5. Lower vehicle.
