Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
10. Install outer hub (1) bearing (2).
11. Install thrust washer (2).
CAUTION: Thrust washer is designed for left or right side and are not interchangeable.
12. Install inner hub (1) nut (2).
13. Tighten inner hub nut with Hub Nut Socket 10095 to 300 Nm (221 ft. lbs.) while spinning the wheel hub constantly. Turn back inner nut and then
tighten until it touches the thrust washer without play. Then tighten 1/8 turn.
14. Install locking plate (2).