SRT-4 L4-2.4L Turbo VIN S (2004)
Fig. 5
7. SRT-4 vehicle remove the fascia to crossmember upper blockers from the fascia (Fig. 5).
INSTALLATION
1. SRT-4 vehicle place into position the fascia to crossmember upper blockers to the fascia (Fig. 5).
2. Position fascia on vehicle , (Fig. 3) and (Fig. 4).
3. Install nuts attaching front bumper fascia to bottom of fender flange.
4. Attach fascia horns to radiator crossmember.
5. SRT-4 vehicle install air dam four attaching screws (Fig. 2).
6. Install air dam to crossmember fasteners (Fig. 1).
7. Install splash shield attaching screws.
8. Connect fog lamp wiring harness.
