SRT-4 L4-2.4L Turbo VIN S (2004)
6. Disconnect rubber grommet from dash panel behind instrument panel.
7. Pull release cable through hole in dash panel.
8. Remove cable and handle from vehicle.
INSTALLATION
1. From inside of vehicle feed remote release cable through hole in dash panel (Fig. 7)
2. Connect rubber grommet into dash panel.
3. Install screws attaching hood release handle to cowl panel.
4. Install left front cowl trim panel.
5. Connect any remote cable attachments (Fig. 6).
6. Connect remote hood release cable to hood latch.
7. Close hood and verify operation.
8. Check remote hood release cable for proper operation.