SRT-4 L4-2.4L Turbo VIN S (2004)
10.
Make sure main lever is in the correct position, (Fig. 3). If the main lever is in the up position before the pin/block, (Fig. 4), it means the module is
mistimed (symptoms for this are that the module will go to vent, but will not open).
11.
If the sunroof is mistimed, move the sunroof to the closed position and carefully move the mechanism into the vent position (by using the switch),
guiding the main lever so the pin/block goes into the slot/track of the main lever.
12.
Push the locker slide all the way back in the mechanism bracket.
13.
Align the main lever, bushing and locker slide, (Fig. 5), by pushing down on the bracket and pulling forward on the main lever.