SRT-4 L4-2.4L Turbo VIN S (2004)
Power Seat Switch: Testing and Inspection
For complete circuit diagrams, refer to Wiring Diagrams.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the outboard seat cushion side shield. Refer to Power Seat Switch in the Removal and Installation section for
the procedure.
Power Seat Switch Electrical Pin LD.
3. Use an ohmmeter to test the continuity of the power seat switch in each switch position. See the Power Seat Switch Continuity chart. If OK, refer
to the Seat Track Diagnosis and Testing section. If not OK, replace the faulty power seat switch.
