SRT-4 L4-2.4L Turbo VIN S (2004)
8. Connect the brake fluid level switch wiring connector (Fig. 97).
9. Fill the master cylinder to the proper level.
10. Pump the brake pedal several times, then check brake fluid level in master cylinder reservoir. Adjust brake fluid level as necessary.
CAUTION: It will be necessary to bleed the entire base hydraulic system if the brake system has been open to air for an excessive amount of time
or air is present in the lines.
11. Check for leaks.
12. Road test the vehicle to ensure proper operation of the brakes.
