SRT-4 L4-2.4L Turbo VIN S (2004)
6. Remove both rear parking brake cables from the parking brake cable equalizer (Fig. 150).
7. Remove the rear seat cushion from the vehicle.
8. Fold the rear carpeting forward to expose the parking brake cables at the end of the rear floor.
9. Install the box end of a 1/2 inch wrench over the parking brake cable retainer (Fig. 141). Push the wrench onto the retainer until the retainer fingers
are collapsed. From under the carpeting, grasp the parking brake cable housing and pull cable straight out of the bracket attached to the floor.
10. Raise the vehicle.
11. Remove the rear tire and wheel assembly from the vehicle.
12. On vehicles equipped with rear drum brakes, remove the brake drum.
13. On vehicles equipped with rear disc brakes: