SRT-4 L4-2.4L Turbo VIN S (2004)
8. Remove rear cover and balance shafts (Fig. 149).
9. Remove four carrier to crankcase attaching bolts to separate carrier from engine bedplate.
BALANCE SHAFT CARRIER
The following components will remain intact during carrier removal: Gear cover, gears, balance shafts and the rear cover (Fig. 145).
1. Drain engine oil.
2. Remove the oil pan and pick-up tube.
3. Remove chain cover, guide and tensioner (Fig. 146).
4. Remove screw retaining balance shaft drive sprocket (Fig. 147).
5. Move balance shaft inboard through drive chain sprocket. Sprocket will hang in lower chain loop.
6. Remove carrier to crankcase attaching bolts to remove carrier.