SRT-4 L4-2.4L Turbo VIN S (2004)
Brake Fluid: Service and Repair
STANDARD PROCEDURE - BRAKE FLUID LEVEL CHECKING
Brake fluid level should be checked a minimum of twice a year.
Master cylinder reservoirs are marked, FULL and MIN, indicating the allowable brake fluid level range in the master cylinder brake fluid reservoir
(Fig. 89).
CAUTION: Use only Mopar brake fluid or an equivalent from a tightly sealed container. Brake fluid must conform to DOT 3 specifications. Do not
use petroleum-based fluid because seal damage in the brake system will result.
Although there is a range, the preferred level is FULL. If necessary, adjust the brake fluid level to the FULL mark on the side of the master cylinder
brake fluid reservoir.
