SRT-4 L4-2.4L Turbo VIN S (2004)
Crankshaft Position Sensor - 2.4L Turbo
7. Remove the sensor.
INSTALLATION
1. Check O-ring for damage and lubricate the O-ring with engine oil before installing sensor.
2. Use a twisting motion when installing the sensor.
3. Install and tighten the crankshaft position sensor bolt and tighten to 9 N.m (80 ± 15 in. lbs.).
4. Connect and lock the electrical connector to the crankshaft position sensor.
5. Install the Structural Collar, refer to the Engine, Structural Collar Removal and Installation section.
6. On 2.4L SRT-4 install the lower inner cooler hose to metal tube and tighten clamp.
7. Lower vehicle.
8. Connect the negative battery cable.
