SRT-4 L4-2.4L Turbo VIN S (2004)
Power Mirror Switch: Testing and Inspection
Power Foldaway Mirror switch
The following test is designed to be used only on vehicles equipped with power fold-away side view mirrors.
Power Fold-Away Mirror Switch
1. Remove power mirror switch from mounting position.
2. Using an ohmmeter, test for continuity between the terminals of the switch as shown in the tables below.
NOTE: When testing using the chart below be certain to read the chart correctly. Example - When testing left mirror "DOWN", pins 1, 9, 10 will
show continuity to each other, and pins 3, 4, 5 will show continuity to each other.
3. If test results are not obtained as shown in the tables below, replace the switch.
