SRT-4 L4-2.4L Turbo VIN S (2004)
Front Steering Knuckle: Service and Repair
REMOVAL - STEERING KNUCKLE (FRONT)
NOTE: Before proceeding, review all Warnings and Cautions.
1. Apply the brakes and hold in place.
2. Raise the vehicle.
3. Remove the front tire and wheel assembly.
4. Remove the cotter pin, lock nut and spring washer from the hub nut (Fig. 2).
5. While the brakes are applied, loosen and remove the hub nut on the end of the driveshaft (Fig. 2).
6. Release the brakes.
7. Remove the front disc brake caliper and adapter as an assembly, and the brake rotor from the steering knuckle.
8. Remove the nut attaching the outer tie rod to the steering knuckle. To do this, hold the tie rod end stud with a wrench while loosening and
removing the nut with a standard wrench or crowfoot wrench (Fig. 4).