SRT-4 L4-2.4L Turbo VIN S (2004)
NOTE: Before installing the stabilizer bar, make sure the bar is not upside-down. The stabilizer bar must be installed with the curve on the
outboard ends of the bar facing downward to clear the control arms once fully installed (Fig. 53).
2. First, place the stabilizer bar in position on the front suspension crossmember. The slits in each cushion must point toward the front of the vehicle
and sit directly on top of the raised beads formed into the stamping on the crossmember. Next, install the cushion retainers, matching the raised
beads formed into the cushion retainers to the grooves formed into the cushions. Install the cushion retainer bolts, but do not completely tighten
them at this time.
