SRT-4 L4-2.4L Turbo VIN S (2004)
2. Install clutch release bearing to lever. Apply grease to interface points. Make sure release bearing retainers engage lever pocket as shown in (Fig.
24).
3. Apply grease to pivot ball, and on release lever at slave cylinder contact point.
4. Install clutch release bearing/lever assembly into position by sliding bearing onto input bearing retainer, and using moderate hand pressure to seat
release lever to pivot ball (Fig. 25). A "pop" sound should be heard. Verify proper engagement by lightly pulling outward on lever at pivot ball
location, and then actuating lever and bearing to ensure proper operation.
5. Reinstall transaxle assembly
