SRT-4 L4-2.4L Turbo VIN S (2004)
Axle Shaft: Service and Repair
Intermediate Shaft
INTERMEDIATE SHAFT
REMOVAL
NOTE: The intermediate shaft support bearing is not serviced separately. Bearing replacement requires shaft assembly replacement.
1. Remove passenger side halfshaft assembly.
2. Remove two (2) intermediate shaft bearing-to-bracket bolts (Fig. 1).
3. Slide intermediate shaft/bearing assembly out of transaxle (Fig. 1).
4. Inspect transaxle output seal and replace as necessary.
5. If necessary to remove support bracket, remove two