SRT-4 L4-2.4L Turbo VIN S (2004)
Fig. 6
3. Remove weatherstrip from the retainer channel (Fig. 6).
4. Remove retainer channel from the body side aperture.
INSTALLATION
1. Install retainer channel to the body side aperture.
2. Remove weatherstrip from the retainer channel.
3. Connect the top and bottom push in fasteners to B-pillar applique. Gently push on the applique to install from the vehicle.
Secondary Sill Weatherstrip
SECONDARY SILL WEATHERSTRIP
REMOVAL
Fig. 7
1. Using a fork-type prying tool, disengage push in fasteners attaching sill secondary weatherstrip to door (Fig. 7).
2. Remove weatherstrip from door.
