SRT-4 L4-2.4L Turbo VIN S (2004)
Windshield Washer Spray Nozzle: Service and Repair
REMOVAL
1. Open hood.
2. Disconnect the washer hose from the underside of the washer nozzle.
3. Using a plastic body filler spreader or equivalent (credit card), gently place it underneath the front of the washer nozzle. Be careful not to damage
the hood seal underneath the nozzle.
4. Rock the nozzle back and forth slightly to release it from the hood panel.
INSTALLATION
1. Position nozzle over hole in hood panel and firmly snap into place. Make sure the seal is present and not damaged.
2. Connect hose to nozzle on underside of hood.
3. After connecting hose, check for proper system function and to assure leak free connections by actuating the washer system switch from inside of
vehicle. Verify nozzle aim.
