Stealth V6-2972cc 3.0L SOHC (1995)
Brake Caliper: Service and Repair
Removal and Installation
Front
1. Raise and support vehicle, then remove wheel and tire assembly.
2. Disconnect brake hose at caliper strut and brake caliper, then cap brake line.
3. Remove brake pads as outlined under Brake Pad/Service and Repair. See: Disc Brake System/Brake Pad/Service and Repair
4. Remove caliper support to steering knuckle attaching bolts, then caliper support.
5. Reverse procedure to install, noting the following:
a. Tighten bolts to specifications.
b. Bleed brakes. See: Brake Bleeding
Rear
1. Raise and support vehicle, then remove wheel assembly.
2. Disconnect brake hose.
3. Remove brake assembly attaching bolts, then brake assembly.
