Stealth V6-2972cc 3.0L SOHC (1995)
Ignition Cable: Component Tests and General Diagnostics
High Tension Cable Spark Test
1. Disconnect the high-tension cable from the distributor cap.
2. Hold the high tension cable about 6 - 8 mm (0.24 - 0.31 in.) away from engine proper (grounding portion such as cylinder block) and crank engine
to verify that sparks are produced.
Spark Plug Cable Test
Spark Plug Cable Test
1. Disconnect, one at a time, each of the spark plug cables while the engine is idling to check whether the engine's running performance changes or
not.
CAUTION: Wear rubber gloves while doing so.
2. If the engine performance does not change, check the resistance of the spark plug cable, and check the spark plug itself.
