Stealth V6-2972cc 3.0L SOHC (1995)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Coolant Temperature Switch Removal and Installation
Engine Coolant Sensor Locations
REMOVAL
1. Drain approximately 2 quarts of coolant from the radiator drain plug.
2. Disconnect the electrical connector.
3. Remove the sensor with a suitable socket.
Coolant Temperature Sensor
INSTALLATION
1. Apply sealant 3M Nut Locking P/N 4171 or equivalent to the threaded portion of the sensor.
2. Install the sensor and tighten to 8 Nm (6 ft-lbs).
3. Reconnect the electrical connector.
4. Refill the radiator and check for leaks.