Stealth ES V6-2972cc 3.0L DOHC (1991)
Alignment: Service and Repair
Front Alignment
Fig. 1 Front Camber Adjustment
Adjust front toe-in after front camber has been adjusted. One camber graduation change changes toe by about 0.02 inch.
CAMBER
To adjust camber, turn strut lower mounting bolt (upper). One graduation is equivalent to about 0.33° in camber.
CASTER
Caster has been factory adjusted, and requires no adjustment.
TOE-IN
Adjust toe-in by releasing tie rod clips, and turning right and left tie rod jam nut, in opposite directions, and equal amount.
