Stealth ES V6-2972cc 3.0L DOHC (1991)
Fuel Injector: Testing and Inspection
Checking Resistance Of The Fuel Injectors
1.
Disconnect the fuel injector electrical connectors.
2.
Measure the resistance between the injector terminals for each injector.
Refer to SPECIFICATIONS/ELECTRICAL.
NOTE: Measuring the resistance for the injectors on the rear bank (# 2,# 4, and # 6) can be done through the injector connector.
3.
Disconnect the fuel injector electrical connector.
Rear Bank Injector Connector For Non-Turbo
4.
Measure the resistance between the injector terminals.
For injector # 2 connect and ohmmeter between the connector terminals # 1 and # 2.
For injector # 4 connect and ohmmeter between the connector terminals # 1 and # 3.
For injector # 6 connect and ohmmeter between the connector terminals # 1 and # 4.
Refer to SPECIFICATIONS/ELECTRICAL.
5.
Reconnect the electrical connectors.
If the resistance is not within specifications, replace the injector(s).