Stealth ES V6-2972cc 3.0L DOHC (1991)
Fig. 2 Rear Camber Adjustment
Camber
To adjust camber, turn lower control arm mounting bolt on the crossmember side. At the left wheel turn the mounting bolt clockwise to indicate
negative camber, at the right wheel turn the mounting bolt right to indicate positive camber. One graduation changes camber by about 0.2°. Adjust
eccentric cam bolt within 90° from central position.
Toe-In Adjustment
The content of this article reflects the changes called out by TSB 02-03-94.
TOE-IN ADJUSTMENT
Adjust rear toe-in after rear camber has been adjusted. On models equipped with 4WD, disconnect 4WD tie rod end from trailing arm prior to making
adjustments.
Fig. 3 Rear Toe-in Adjustment
To adjust toe, turn right and left trailing arm mounting bolts on the crossmember side the same amount. At the left wheel, turn the mounting bolt
clockwise to indicate toe-in. At the right wheel, turn the mounting bolt clockwise to indicate toe-out.