Stealth ES V6-2972cc 3.0L DOHC (1991)
Fig. 2-Shim Installation for Toe-in
Fig. 3-Shim Installation for Positive Camber
Fig. 4-Shim Installation for Negative Camber
REPAIR PROCEDURES:
Installation of Rear Alignment Shims
1.
Block front tires so vehicle will not move.
2.
Release parking brake.
3.
Hoist vehicle so that rear suspension is in full rebound and tires are off the ground.
4.
Remove wheel and tire assembly.
5.
Pry off grease cap.
