dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Synchronizer Hub: > < Fluid - M/T|Capacity Specifications|Page 2291
Page 1
background image

Synchronizer Hub: Customer Interest
M/T - MMC, Difficult To Shift

NO.: 21-01-92

GROUP:

Transmission

DATE:

Feb. 10, 1992

SUBJECT:
Hard To Shift MMC Manual Transaxle

NOTE:
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH MANUAL TRANSAXLES ONLY.

MODELS:

1990-1992 (BD) LASER
1991-1992 (B7) STEALTH
1992      (B8) COLT VISTA

SYMPTOM/CONDITION:

Customer may encounter a hard to shift condition. This may be caused by a binding condition between the synchronizer coating paper and the surface of
the gear taper cone.

PARTS REQUIRED:

1

Friction Modifier

4318060

REPAIR PROCEDURE:

This repair involves adding friction modifier to the transaxle.

1.

Refer to Fig. 1 for applicable models and transaxle, and ensure proper fluid level in transaxle. If fluid has a foamy or milky appearance, the fluid
should be changed. If fluid change is required, use Mopar Hypoid gear oil or equivalent API classification GL-4 or higher, and perform step 2.

2.

Add only 7.5 cc (.25 oz.) of the friction modifier to the transaxle through the filler plug.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE
Labor operation No. 21-00-10-91 . . . 0.2 Hrs.

FAILURE CODE: 3R - High/low operating effort

All Technical Service Bulletins for Synchronizer Hub: > < Fluid - M/T|Capacity Specifications|Page 2291