dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radiator Cooling Fan Temperature Sensor / Switch > < Diagram Information and Instructions|Page 1047
Page 1
background image

Radiator Cooling Fan Resistor: Testing and Inspection

Fig. 35  Radiator Fan Connector Terminals

1.

Measure resistance between connector terminals 1 and 4 of radiator fan connector.

2.

If resistance is not 0.29 - 0.35 ohms, replace resistor.

Radiator Cooling Fan Temperature Sensor / Switch > < Diagram Information and Instructions|Page 1047