dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Turn Signal Flasher > < Diagram Information and Instructions|Page 3896
Page 1
background image

Combination Switch: Service and Repair

Steering Column Switch Replacement

1. Disable airbag, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair.
2. Disconnect battery ground cable.
3. Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
4. Remove turn signal switch as shown noting the following:

a. Remove steering column cover upper to lower attaching screws, then carefully unsnap upper steering column cover from lower.

5. Reverse procedure to install, enabling airbag, refer to MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

Turn Signal Flasher > < Diagram Information and Instructions|Page 3896