dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Turn Signals - Do Not Cancel Automatically|Page 3918 > < Turn Signals - Do Not Cancel Automatically|Page 3912
Page 1
background image

Turn Signal Switch: All Technical Service Bulletins
Turn Signals - Do Not Cancel Automatically

NO.: 08-02-92

GROUP:

Electrical

DATE:

Feb. 10, 1992

SUBJECT:
Turn Signal Does Not Cancel Automatically

NOTE:
THIS BULLETIN APPLIES TO VEHICLES BUILT PRIOR TO JULY 5, 1991 (MDH 07-05-XX).

MODELS:

1991-1992 (B7) STEALTH

SYMPTOM/CONDITION:

The turn signal does not automatically cancel after making a left turn, although cancellation can be made manually. This may be caused by interference
of the ratchet lever and a bracket within the column left side switch.

PARTS REQUIRED:

2

Shim

9411834

REPAIR PROCEDURE:

This procedure involves installing two shims in the left column switch (turn signal switch).

1.

With the ignition key in the OFF position, disconnect the negative battery terminal.

2.

Remove the upper and lower steering column covers.

3.

Remove the left side switch from the column switch assembly. DO NOT DISCONNECT THE ELECTRICAL HARNESS CONNECTOR.

Turn Signals - Do Not Cancel Automatically|Page 3918 > < Turn Signals - Do Not Cancel Automatically|Page 3912