Stealth R/T V6-2972cc 3.0L DOHC (1991)
4.
Loosen the two switch cover attaching screws located on the right side (steering shaft side) of the switch (Figure 1).
5.
Insert one of the shims, PN 9411834, on each screw between the cover and the switch case (Figure 1).
6.
Tighten the cover attaching screws.
7.
Install the column left side switch by reversing the above procedure.
8.
Verify that the turn signal will automatically cancel when the steering wheel is returned to the center position.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
Labor Operation No. 08-85-20-90
. . . . . . . . .
0.3 Hrs.
FAILURE CODE: D4 - No Cancel
