Stealth R/T V6-2972cc 3.0L DOHC (1991)
Throttle Position Sensor: Adjustments
1.
Loosen the tension of the accelerator cable.
Throttle Position Sensor
2.
Disconnect the Throttle Position Sensor connector.
Throttle Position Sensor Test
3.
Connect an ohmmeter between terminals # 3 and # 4, using lead wires with alligator clips.
Throttle Lever Adjustment
4.
Insert a 0.65 mm (0.0256 in.) feeler gauge between the Fixed SAS and the throttle lever.
Throttle Position Sensor Adjustment
5.
Loosen the TPS mounting bolts, then turn the TPS counterclockwise completely.
Continuity should exist at this time.
6.
Slowly turn the TPS in a clockwise direction until continuity is broken.
