Stealth R/T V6-2972cc 3.0L DOHC (1991)
Fig. 8 Stabilizer Bar Assembly. FWD
1. Remove stabilizer bar as shown.
2. Reverse procedure to install, noting the following:
a. Hold stabilizer link ball studs with suitable wrench, tighten self-locking nut so protrusion of stabilizer link is within 0.197 to 0.276 inch.
b. Align LH stabilizer bar bushing with stabilizer bar marking end, then temporarily tighten attaching bolts.
c. Install RH stabilizer bar bushing and bracket, then temporarily tighten attaching bolts.
d. Install stabilizer bar to stabilizer link then tighten bracket attaching bolt to specifications.
