Stealth R/T V6-2972cc 3.0L DOHC (1991)
4.
Refer to the service manual for trim panel installation.
Glass Guide Roller Noise
This repair procedure involves lubricating the door glass guide tracks.
1.
Remove the door trim panel as described in the service manual.
2.
Apply Mopar Multi-Purpose Lubricant on the front and rear door glass guide tracks (Fig. 2).
3.
Install the door trim panel as described in the service manual.
Wind Noise/Water Leaks/Poor Glass Fit
This repair procedure involves adjusting the door glass guide track, the up stop, and the delta sash.
1.
Adjust the door glass guide track, the up stop, and the delta sash as described in the service manual, using the dimensions shown in Fig. 3A and
3B. (For future reference, write the dimensional changes in your service manual.) Note the following when making the adjustments.
A.
When the rear top corner of the door glass lightly touches the weather strip, the opening between the middle of the door outer panel rear edge and
the front edge of the quarter panel are shown in Fig. 3C.
