Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Brake Caliper: Service and Repair
Removal and Installation
Front
1. Raise and support vehicle, then remove wheel and tire assembly.
2. Disconnect brake hose at caliper strut, then at the brake caliper.
3. Remove brake pads.
4. Remove caliper to steering knuckle attaching bolts, then remove caliper assembly.
5. Reverse procedure to install, then bleed brakes as outlined under Hydraulic System/Service and Repair/Brake System Bleed.
Rear
1. Raise and support vehicle, then remove wheel and tire assembly.
2. Disconnect brake hose at caliper strut, then at the brake caliper. Cap vehicle brake line.
3. Remove brake pads as outlined under Brake Pad/Service and Repair.
4. Remove caliper support to steering knuckle attaching bolts, then caliper support.
5. Reverse procedure to install, noting the following:
a. Tighten bolts to specifications.
b. Bleed brakes as outlined under Hydraulic System/Service and Repair/Brake System Bleed.
