Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Temperature Gauge: Initial Inspection and Diagnostic Overview
Resistance Inspection
Engine Coolant Temperature Gauge Inspection
1. Remove the IG terminal screw from area A.
2. Measure resistance between terminals with circuit tester.
CAUTION: For inspection, use a circuit tester which uses a measurement current of 4 mA or less.
Standard Value:
A - B............................................................................................................................................................................................Approx. 51 Ohms
A - C..........................................................................................................................................................................................Approx. 139 Ohms
B - C..........................................................................................................................................................................................Approx. 190 Ohms
Engine Coolant Temperature Gauge Simple Inspection
Unit Inspection
To check, remove engine coolant temperature gauge unit from the thermostat housing.
Engine Coolant Temperature Gauge Unit Resistance
Engine Coolant Temperature Gauge Unit Inspection
