Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Oxygen Sensor: Service and Repair
Oxygen Sensor Installation And Removal Tool
REMOVAL
1. Disconnect the harness terminal.
2. Remove the sensor with a suitable socket or wrench.
Oxygen Sensor
INSTALLATION:
1. Apply a thin coating of anti-seize compound to the threads.
CAUTION: DO NOT contaminate the sensor tip with anti-seize compound.
2. Install the sensor and torque to 33 ft-lbs (45 Nm.).
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.